Fitted wardrobes for sloping ceilings and awkward spaces
Lofts, eaves, chimney alcoves and under-stairs voids are the spaces a standard wardrobe cannot fill. We measure the room as it actually is, make the furniture to that shape at our Greenford factory, and fit it ourselves. Every photograph on this page is a real UKB installation.

Can a wardrobe be fitted under a sloping ceiling?
Yes. The carcass and doors are manufactured to the measured pitch of the ceiling rather than cut down on site, so the unit follows the roof line and the low end stays usable as shelving or drawers. The same applies to alcoves either side of a chimney breast, which are rarely the same width as one another, and to triangular under-stairs voids.
Arrange a free measure and design visit — 30 to 60 minutes, no obligation.
Why an off-the-shelf wardrobe does not work here
A flat-pack or modular wardrobe is a rectangle. Put one against a sloping wall and you either lose the triangle of space behind it, or you box the slope off and lose the height. Alcoves have the same issue in the other direction — the two sides of a chimney breast are almost never identical, so one of them ends up with a filler panel. Making the furniture to the measured room removes both compromises.
Real installations, West London





Doors, fronts and detail
Fluted and reeded fronts, high-gloss and matt, oak-effect banding, black-framed glass and mirror. Handleless and push-to-open where a handle would be in the way.






Sloping ceilings and alcoves — common questions
Can you fit a wardrobe under a sloping ceiling?
Yes. The carcass and doors are made to the measured pitch rather than trimmed on site, so the unit follows the ceiling line and the space behind it is still usable. The photographs on this page are loft rooms, eaves and under-stairs spaces in West London homes.
What happens to the low end where the ceiling meets the floor?
It becomes shallow shelving or drawers. The internal layout is planned around the pitch — hanging at the tall end, folded storage and shoes at the low end — so nothing is boxed off.
Can I have sliding doors under a sloping ceiling?
Usually not, because a sliding track needs a level head. Where the slope allows we run the head rail along the ceiling line and cut the panels to match, as in the mirrored example above. Where it does not, hinged or push-to-open doors are the better answer and we will say so.
Do you fit alcoves and chimney breasts too?
Yes — alcoves either side of a chimney breast are one of the most common jobs we do. They are rarely the same width as each other, which is why an off-the-shelf carcass does not fit.
How long does it take?
A free design visit and measure takes 30 to 60 minutes. Manufacturing happens at our own Greenford factory, and installation is by our own fitters rather than subcontractors.
Book a free design visit
We measure the room, talk through how you want to use the storage, and give you a price. Design visits are free and there is no obligation. We cover Ealing, Harrow, Hayes, Uxbridge, Brent, Hounslow and Richmond from our Greenford factory and showroom — see all areas we cover.